Basic features and applications
Sulfonyl succinate decyl polyoxyethylene (6) ether ester disodium (HANTAICHEM ® DNS-628) is a non-
Often typical of the yin - non-ion surfactant, with good washing, emulsifying, dispersing, moistening and compatibilizing
And its performance is its molecular formula is C26H48O12Na2S, molecular weight of 630.70. Its unique structure (see high activity
The following figure): ethylene oxide chain in the water was irregular bending stretch, providing a greater steric hindrance; the same time,
The sulfonic acid groups on the succinic acid carbon chain and the carboxylic acid groups at the molecular ends are both strongly charged negatively
Of the hydrophilic groups, resulting in the system charge density, wide distribution, so that the system has a very good resistance to electricity
And the mechanical stability of the quaternary ammonium salt and the quaternary ammonium salt surface can be used alone
Active agent has excellent co-solubility, the dissolution, compatibilization, lime soap dispersibility and other properties have greatly improved.
So, it can not only be used alone, but also as the main Emulsifier with other anions, non-ion,
The use of polyvalent cationic surfactants is widely used in personal care, washing, metal processing,
Paint, foam, dyes, paints, adhesives, especially the emulsion synthesis industry.
It is particularly suitable for latex polymerization, it is particularly suitable for vinyl acetate emulsion, vinegar emulsion, vinegar and acrylic emulsion and pure use wide
Acrylic emulsion, EVA-based emulsion synthesis; since it can impart moderate particles to the emulsion, the production
High solid low viscosity latex, slag less, freeze-thaw stability is good; and make latex film transparent, good gloss; it also
Often collaborate with other Emulsifiers to improve the particle size of the synthetic latex, so it is a very heavy
To be effective latex particle size improver; and can be used as a post-addition stabilizer for the production of latex.
Emulsions, HANTAICHEM ® DNS-628 Emulsifier unlike some that will affect the crosslinking monomers (such as N- methylol
Based acrylamide, etc.) cross-linking effect.
Not strong alkali
Resistant polyvalent cations
Molecular structure diagram HANTAICHEM ® DNS-628
Characteristics of emulsion polymerization
HANTAICHEM ® DNS-628 is currently disabled only no alkylphenols, also contain volatile organic compounds. In emulsion polymerization,
Also has the following characteristics:
When HANTAICHEM ® DBMS-45) emulsion, the product has good adhesion Elastic.
Physical and chemical properties
Appearance (25 ℃) colorless to light yellow liquid
Color (APHA) <150
Active content (% by weight) 23-24
Solid content (% by weight) 29-31
PH (1% aqueous solution) 5.5-6.5
Specific gravity (25 ° C, g / cm 3) 1.075 to 1.085
Viscosity (25 ℃, CPS) <40
Freezing point (10% aqueous solution, ° C) -1
Flash point (closed cup, ℃) greater than 93
Free acid (%) ≤ 6.0
Critical micelle concentration (CMC) (wt%) 0.06-0.08
Sodium bisulfite content (iodine value method, weight%) <0.5
Solubility
Partially dissolved in a polar solvent
Insoluble in nonpolar solvents
Completely dissolved in water
Foaming
Improved ROSS-MILES foam test (GB / T7462-94)
HANTAICHEM ® DNS-628 foam height ml (0.5%, 25 ℃)
At the beginning: 32
After 15 minutes: 18
Surface Tension
HANTAICHEM ® DNS-628 surface Zhang Li test, the following concentrations in aqueous solution at 25 ℃ temperature
The results are as follows:
Concentration (wt%) 0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
72.0 67.0 59.2 56.7 Surface Zhang Li 55.3 53.4 52.1 50.6 50.6 50.9 50.9 VII wettability (D raves test)
HANTAICHEM ® DNS-628 by the method Wetting (% aq, 3 × 3 shares 21 shares 21, 15 × 1.5cm 2 canvas sheet) permeation time of the product was measured (averaged), the following results:
HANTAICHEM ® DNS-628 dose (%) 0.01 0.05 0.1 0.25 0.5 0.025
Wetting time (seconds) - - 1422 421 141 44
Biodegradation and environmental protection
HANTAICHEM ® DNS-628 is not listed as hazardous substances to the environment. This product is completely biodegradable.
Health and safety
Before using this material, please read Han Thai company security number HANTAICHEM ® DNS-628 material about the product
According to (MSDS). HANTAICHEM ® DNS- 628 any significant health hazards do not exist in conventional industrial operations.
Storage and operation
Local HANTAICHEM ® DNS-628 will be stored in a cool, ventilated should be stored above 15 ℃ to avoid gel;
If HANTAICHEM ® DNS-628 gel occurs due to low temperature, stirred at room temperature until needed warmed above the gel disappeared.
Quality HANTAICHEM ® DNS-628 does not change because of gelation occurs. Please airtight container when not in use.
Calcium plastic materials, enamel, stainless steel and other containers made of materials, are suitable for storage of HANTAICHEM ® DNS-628
With the processing. At room temperature and under normal storage conditions, the product can be stored for at least one year.