6218 is a non-ion type, thixotropic Thickener hydrophobically modified polyurethanes, can effectively improve the low shear viscosity, and a higher Thickening magnification, high thixotropy and yield value.

6218 and cellulose-based and the base swelling Thickener Thickener type has excellent formulation compatibility, the coating designers freedom of choice of cellulosic and an alkali swelling Thickener Thickener according to the desired properties.

6218 designed formulated with textured paint relief effect, effective in improving low-shear viscosity, the coating having a high pseudoplasticity, and has the following advantages: 
* Excellent sag resistance, film fullness, spatter resistance, and resistance Water-based Water-based anti-points

* Superior texture retention, provides high gloss 
* Low foaming, film is good, it does not affect the gloss

* Anti-microbial and anti-mildew

Typical physical properties

→ Appearance: clear to slightly turbid liquid

→ chemical composition of: non-ion

→ PH value: 7.0

→ Effective parts: 42%

→ solvent: water / glycol monobutyl ether: 28% / 30%

→ Brookfield viscosity: 3000 cps (25 ℃)

◆ recommended dosage and method of use

→ coatings total amount 0.2 to 1.0% (finished form), the specific dosage should be subject to experiment; 6218 first with ethylene glycol (or propylene glycol) by 1: 1 dilution, the dilution was added with stirring to 5 parts water evenly 3 , Can be added slowly at low speed with stirring; it is advisable to add the emulsion before adding high gloss

◆ Packaging and storage:

→ 25 Gongjin plastic drum or 200 kg plastic drum.

→ This product should be sealed, in a cool dry place, if not a run, with the lid after tightening to prevent leakage